一种基于特征值反求的复合材料层合板波动特性的近似修改方法

采用一种特征值反求形式的方法用来近似层状复合板的波动特性修改。通过敏感度分析,确定层合板中能最显著地改变结构波动特性的结构参数为设计变量。采用二阶泰勒展式近似特征值和特征频率相对于设计变量的改变率。计算了不同结构变化时的色散特性,并与精确计算结果进行了比较。结果证明本方法对于层状复合板波动特性修改的近似是可行并且有效的。     

LINEAR ACTIVE STRUCTURES AND MODES (Ⅱ) —DISCRETE SYSTEMS AND BEAMS

IntroductionThestudiedobjectintheclassicstructuredynamicsisthepassivestructureswhicharechangedintoactivestructurewhencontroldevicesorsmartmaterialsareintroducedintoandthecontrolfunctionisapplied .Anactivestructureisgenerallycalledactivesystem .Asforthedefinitionofactivestructure ,itistheconceptofworthydiscussion[1].Thedefinitionshouldbebecomingrigorouswiththestudyontheactivestructuraldynamics.Withincertaincategoryofactivestructuresinpaper (Ⅰ ) [2 ],someattributesaboutthemodesoflinearactivest…     

中国红层的分布及地质环境特征

根据我国红层的分布特征及形成背景 ,将我国红层划分为西南地区红层、西北地区红层、中南、东南地区红层和其他地区 (西藏及华北的部分地区 )红层。重点研究了以川滇红层为代表的西南地区红层和以甘肃红层为代表的西北地区红层 ,研究了各个区域红层的地质构造特征、地形地貌特征、气候环境特征等工程地质环境特征 ,根据工程地质环境特征 ,将研究区域的红层划分为四川盆地红层、西昌—滇中红层、滇西红层和甘肃红层.     

Study of the aerodynamic characteristics of cone-sphere models in a hypersonic flow

The aerodynamic characteristics of cone-sphere models are studied at Mach numbers M = 6, 8.4, and 12 to 13 over a wide Reynolds number range. Models of a braking device (sphere) were connected with a load (frustum of a cone) by means of shrouds. The dependences of the aerodynamic coefficients C _x and C _y on the angle of attack α were obtained for different relative dimensions of the load and the braking device, shroud lengths, and Mach and Reynolds numbers. The effect of the above-mentioned parameters on the aerodynamic characteristics of the models is analyzed. The C _x (Re_D) dependences of load-parachutemodels in a symmetric flow are determined over the wide Mach and Reynolds number ranges 6 ≤ M ≤ 13 and 3 · 10³ ≤ Re_D ≤ 3 · 10⁶.     

薄膜润滑中的应力偶效应

利用应力偶理论计算了薄膜润滑的膜厚特性.计算结果表明:应力偶的作用相当于增加润滑剂粘度,其可以增加油膜厚度,提高承载能力;同时应力偶作用依赖于油膜尺寸,润滑油膜越低,其影响越明显.     

Two-dimensional adaptive Eulerian-Lagrangian method for mass transport with spatial velocity distribution

A Eulerian-Lagrangian scheme is used to solve the two-dimensional advection-dispersion equation. Concentration and its partial differential operator are decomposed into advection and dispersion terms. Thus, advection is formally decoupled from dispersion and solved by continuous forward particle tracking. Dispersion is handled by implicit finite elements on a fixed Eulerian grid. Translation of steep gradients of concentration in advection-dominated flow regimes, is done without numerical distortion. Continuous spatial distribution of velocities are evaluated by using Galerkin's approach in conjunction with Darcy's law based on hydraulic input data from each element. The method was implemented on coarse FE grid with linear shape functions, demonstrating no over/under shooting and practically no numerical dispersion. Simulations, covering a wide range of Peclet numbers, yield high agreement with analytic and practical results.     

含45°斜裂纹圆柱薄壳动态特性试验研究

测量了含45°斜裂纹圆柱薄壳的固有频率并拍摄了相应的激光全息振型图．实验表明斜裂纹比轴向和环向裂纹对壳体动态特性的影响更大,致使振型图发生了严重畸变而显得相当复杂,利用传统思路难以找到裂纹长度对壳体动态特性的影响规律．为此,把裂纹周围的振动看作为一种独立的局部振动,从而把含斜裂纹壳体的各种复杂振型划分为3类:纯局部振动振型、纯原振动振型、局部振动和原振动耦合振型．其中前两种振型的固有频率皆随裂纹的加长而降低,但对于耦合振型有时会出现“随裂纹加长频率反而升高的现象”, 这是由于把壳体原振动的频率和局部振动的频率相混淆而产生的错觉．     

频响函数综合法预测结构在水下的动特性

通过对一个结构模型在空气中和水下的动特性的研究，探讨了由结构在空气中的模态参数和水的附加质量预测结构在水下的模态参数的频响函数综合法，用以替代实体结构在水下的动特性试验。应用这种方法预测得到了结构在水下的模态参数并与结构的湿模态试验结果进行了对比。研究结果表明，对于所研究的梁形结构，不考虑水的阻尼，将水对结构的影响考虑成为附加质量，应用频响函数综合法预测结构在水下的模态参数是可行的     

SHPB试验中粘弹性材料的应力均匀性分析

采用特征线解法，对满足ZWT方程的粘弹性材料在高应变率SHPB试验中的应力均匀性进行了数值研究。着重分析了不同的材料本构粘性(松弛时间)、瞬态波阻抗比和入射波升时对于试样中应力均匀性、应变均匀性和平均应变率等的影响。为今后动态试验的试样设计提供了一定的理论依据。     

复杂梁动力问题的近似分析方法

本文介绍了在各种复杂条件下，分析梁振动特性的一个近似方法－模态摄动法。这一方法是在等截面均匀梁的模态子空间内实施，将复杂梁的变系数微分方程的求解转化为代数方程组的求解。通过算例，表明这一方法简单实用，且有良好的近似性。